Deli books printing is a traditional technique for printing on all types of paper in book form, and notebook printing covers all relevant notebook printing methods such as flat, letterpress, gravure, and screen, with applications varying from country to country. deli books printing covers several major printing methods, and different printing methods are chosen during the plate-making stage, depending on the nature of the product, for different printing methods. The plate-making process is also different.

1、Notebook product printing steps: the original

Suitable for flexible printing of the original design should have the following characteristics: the number of colors, but less overprint; do not require reproduction of particularly small details; screen line is not too high, but can achieve color printing effect; can be inline to do packaging processing.

2, Notebook products printing steps: film

Meet the needs of plate making, clear graphics, accurate size specifications; use frosted film, requiring consistent density of the four corners of the film; use drug film orthography; measured with a transmissive density meter, white bit density of 0.06 or less; black bit density of 3.5 or more.

3, Notebook school stationery supplies printing steps: exposure including back exposure and main exposure

(1) back exposure

Light-sensitive resin version of the support film up, protective film down flat in the exposure drawer to receive exposure. UV light through the support film so that the photographic bonding layer cured. To establish a solid substrate, but also to control the depth of the plate wash, to strengthen the support film and photopolymer layer bonding force. Back exposure time is determined according to the required thickness of the substrate.

(2) the main exposure

Also known as front exposure, photopolymer plate support film facing down, protective film facing up. The length of the main exposure time by the plate type and the strength of the light source to determine. Exposure time is too short will make the slope of the graphic too straight, curved lines, small words, small points partly washed out, and vice versa exposure time is too long will lay the plate, blurring of the word. If there are large, small, coarse and fine lines on the same printing plate, visible with a black film to cover the exposure separately, the fine part will not be lost due to flushing to ensure the quality of the printing plate.

4, Notebook school stationery supplies printing steps: development

The un-sensitive part of the wash dissolved, retaining the relief of light polymerization. Washing time length according to the plate thickness and print pattern depth decision, washing time is too short, the plate will be left un-sensitized resin and affect the depth of plate making, washing time is too long will make the plate expansion, resulting in the fine part of the deformation or fall off.

5, Notebook school stationery supplies printing steps: drying

Remove the washing solvent, so that the printing plate to restore the original size thickness. Baking temperature between 50-60 ℃. Baking time according to the plate thickness and wash time to determine the length of the general thick version of two hours, thin version of an hour. Baking time is too long, the baking temperature is too high will make the plate brittle and affect the printing life. Baking temperature is too low will extend the drying time, baking time is too short, printing will appear rotten plate phenomenon.

6、Notebook product printing steps: post-processing

That is, in addition to sticky and post-exposure. Make photographic resin thoroughly hardened (polymerization) to achieve the hardness indicators should be, and eliminate the printing plate sticky, in order to facilitate the transfer of ink. Post-processing time from the test, the purpose is not cracked, not sticky.